Exitex Threshex Replacement Seal 1m

This Exitex replacement seal is made to suit the Exitex Threshex Sill.

Fitting Instructions:

• Remove old seal by cutting it down the centre with a sharp knife. Ensure all dirt etc. is removed from channel and under side retaining flanges.
• Cut new seal to length plus 5mm ~ 1/4" (to ensure tight seals at the ends)
• Carefully concave the seal allowing the retaining flanges to extend into the side retaining grooves ensuring it is inserted in the correct way.
• Compress new seal to insert into side retaining grooves.
• If any difficulty is experienced unscrew sill, slide cut old seal then insert replacement as described above.